The Manual Reset Methods for Brother Printers

[baitmaster]

Instructions:

1. Disconnect Brother Printer from power cord.
2. Press Set button and while holding the Set button re-connect the printer to the power cord (electric source).
3. It will display an error message ?Machine Error 46? on the LCD
4.3After the Error code appear, press the ?arrow up button? ( ^ ) there will be numbers that are going to be display.
5. Choose 8 then press Set Button
6. Press Arrow Up button again then choose Zero (0) and press Set Button Again, now you will enter Service Mode.
7. Press ?Mono Key/Button? 25 times or until ?Purge Counter Appear?
8. Now press arrow up (^) again then choose ?2? press Set Button
9. Press Arrow Up (^) again then choose ?7? press Set Button
10. Press Arrow Up (^) again then choose ?8? press Set Button
11. Press Arrow Up (^) again then choose ?3? press Set Button
12. The purge counter will be reset to Zero.
13. Now Press Stop/Exit Button
14. The printer will return to ?Machine Error 46? again
15. Press Arrow Up (^) then choose 9 press Set Button
16. Press Arrow Up (^) again then once more choose 9 press Set Button
17. The Printer will reset then wait until it power up again.

Video sample tutorial for Brother MFC-J200 Model